What parts fit the GE WPDH8910K1MV?

Emi filter WH41X10301, Heating element thermistor WH12X10351, Drive belt WH08X10024, Drain pump assembly WH23X10028, Drive motor WH20X10028.

GE WPDH8910K1MV washer parts: emi filter

Emi filter

Replaces WH41X10123

Filters clog with use. The manual lists how often to change it.

Shop the emi filter on Amazon Other models that use WH41X10301

Heating element thermistor

Replaces WH12X10310

No heat after a full cycle usually means a burned-out element.

Shop the thermistor on Amazon Other models that use WH12X10351

Drive belt

Turns the drum. A washer that fills but won't spin points here.

Shop the drive belt on Amazon Other models that use WH08X10024

Drain pump assembly

Water left in the drum after a cycle usually points to the pump.

Shop the pump assembly on Amazon Other models that use WH23X10028

Drive motor

A motor that hums but won't turn, or stops once it's warm, needs replacing.

Shop the drive motor on Amazon Other models that use WH20X10028

1Emi filterWH41X10301

2ThermistorWH12X10351

3Drive beltWH08X10024

4Pump assemblyWH23X10028

Part numbers come from the Sears PartsDirect parts list for the GE WPDH8910K1MV (view the list), checked November 15, 2026. Amazon buttons open a search for the part number; we may earn a commission.

Where the model number is

Front-load: on the door frame or the door rim. Top-load: under the lid or on the back of the control panel.

Other GE washers

WNRD2050G3WCWNXR2100T2AAWNXR2100T3WWWPDH8800J0WWWPDH8850J3WWWPDH8900J4MVWPRB9250C0CCWPRE6150H1WTWPRE8100G0WTWPSF4170W0WW